What the RER14679 Screw Set Is
The Redcat Racing RER14679 is a hardware set containing 10 button head hex machine thread screws, each with a size of 2.6x8mm. This part is categorized as a spare hardware set for the MARKSMAN legacy vehicle platform. It is a simple, functional component: screws that hold other parts together.
RER14679 Catalog Facts
- RER14679: Redcat Racing RER14679 is a hardware part consisting of 2.6x8mm button head hex machine thread screws, supplied in a set of 10 pieces. Knowing the exact size and head style helps you confirm fitment before you order.

RER14679 - RER14679: This listing is categorized under spare parts and hardware for the MARKSMAN legacy vehicle platform. The screws are intended for a specific vehicle line; they may not fit other models without checking.
Common Problem: Stripped or Damaged Screws
Button head hex screws can strip if the driver bit is not fully seated or if the screw is overtightened. Because the RER14679 screws are machine thread, they rely on precise engagement. If the hex socket rounds out, the screw becomes difficult to remove without a screw extractor. The set of 10 allows you to replace damaged screws, but you should inspect the mating threads in the part as well if stripping occurs.
Common Problem: Fitment Confusion
The RER14679 screws are listed for the MARKSMAN platform, but the catalog does not specify which exact locations on that vehicle use this size. The supplied evidence also states: 'Please confirm the size and head style match your application before purchase.' If you order these screws for a different model or an upgraded part, you need to verify that the 2.6x8mm size and button head are correct. Measuring the existing screw or checking the manual is the only reliable way to avoid a fitment issue.
Common Problem: Corrosion or Wear
The catalog does not specify the material or coating of the RER14679 screws. If they are uncoated steel, they may rust in humid conditions or after exposure to water. Wear signs could include surface rust or a degraded hex socket. The catalog does not confirm corrosion resistance, so if you operate in wet environments, consider applying a light oil to the screws or replacing them with stainless steel equivalents after checking fitment.
How to Fix or Prevent These Issues
To prevent stripping, use a quality hex driver that fits snugly and avoid over-torquing. If a screw is already stripped, try a rubber band between the driver and the screw head for extra grip, or use a screw extractor tool. For fitment issues, always measure the original screw's length and diameter before ordering. To prevent corrosion, store your RC in a dry place and apply a thin coat of corrosion inhibitor on exposed hardware. The RER14679 set gives you 10 screws, so you have spares for replacement when wear shows up.


