Start With the Part Number and Vehicle
The Redcat RER23801 is a hardware part made up of 3x47mm shoulder button head hex machine thread screws. Before you install anything, match the part number to the vehicle you are working on. The catalog lists RER23801 for current vehicles including the COE CUSTOM HAULER and TRAILER. If your model is not in that list, treat fitment as unconfirmed and check your vehicle documentation before ordering.
The listing includes four screws. That quantity matters for installation planning: you can replace a set of fasteners in one job, or keep the extras as spares for future repairs.
What the RER23801 Listing Confirms
- RER23801: Redcat Racing RER23801 is a hardware part consisting of 3x47mm shoulder button head hex machine thread screws. This tells you the fastener type and size so you can confirm it matches the location you are repairing.

RER23801 - RER23801: This listing includes four pieces. Four screws let you complete a multi-fastener repair or keep spares on hand.
- RER23801: Listed for current vehicles including COE CUSTOM HAULER and TRAILER. Use this as a starting fitment check before you begin installation.
How to Install RER23801 Screws
The catalog does not include a vehicle-specific torque spec or step-by-step procedure, so use the general sequence below and rely on your vehicle documentation for exact placement and tightening.
- Confirm the location: Identify the screw positions on your COE CUSTOM HAULER or TRAILER that use 3x47mm shoulder button head hex machine thread screws. If you are unsure, consult your vehicle manual or parts diagram.
- Remove the old fastener: Use the correct hex driver for the button head. Support the component so it does not shift when the screw comes out.
- Check the new screw: Compare the RER23801 screw to the one you removed. Confirm the shoulder and thread match the mounting point before threading it in.
- Start by hand: Thread the screw in by hand first to avoid cross-threading. Once it seats, tighten with the hex driver.
- Tighten evenly: If you are installing more than one screw in a pattern, tighten them evenly rather than fully tightening one at a time. The catalog does not supply a torque value, so use light, consistent pressure and stop when the part is secure.
- Check movement: After installation, move the associated component through its range to confirm the screw does not bind or interfere.
RER23801 Fitment Checks Before You Order
Fitment for RER23801 is confirmed by the catalog only for the vehicles listed. Use these checks to decide whether this part is right for your repair.
- Is your vehicle a COE CUSTOM HAULER or TRAILER?: The catalog lists RER23801 for current vehicles including these models. If yes, this is a supported starting point.
- Does the mounting point use a 3x47mm shoulder button head hex machine thread screw?: Match the size and type to the location you are repairing. Do not substitute a different screw style without confirming it is appropriate.
- How many screws do you need?: The pack contains four. Count the fasteners at the repair location so you know whether one pack covers the job.
- Is your model not listed?: Fitment is not confirmed by the supplied information. Check your vehicle documentation or contact Redcat support before ordering.
What the Catalog Does Not Tell You
The supplied information does not include a torque specification, thread pitch, or a vehicle-specific installation diagram for RER23801. It also does not list every compatible vehicle. Treat these as limits on what the catalog can confirm, not as evidence that the part is unsuitable for your model. When a detail is missing, use your vehicle manual or ask Redcat support rather than guessing.
When to Replace RER23801 Screws
Replace a screw when the hex head is stripped, the threads are damaged, or the fastener no longer holds the component securely. Because the RER23801 pack includes four pieces, it is also a sensible spare to keep with your RC repair supplies for the COE CUSTOM HAULER and TRAILER. Inspect the mounting point for damage before installing a new screw, and replace any fastener that shows signs of wear.


