Back to Blog
How-to Guides 2026-11-16 Redcat Racing 0 views

How to Install Redcat 13827-V1-G: Step-by-Step

How to Install Redcat 13827-V1-G: Step-by-Step

A practical guide to installing the Redcat 13827-V1-G green SUV body shell on EVEREST GEN7 PRO and GEN7 SPORT, with fitment checks and what the catalog does not confirm.

Start with the vehicle and the part number

The Redcat 13827-V1-G is a genuine replacement body shell, not a chassis or drivetrain component. Before you plan any installation work, confirm two things: that your vehicle is an EVEREST GEN7 PRO or EVEREST GEN7 SPORT, and that the part you are holding is marked 13827-V1-G. The catalog lists this as a green SUV-style body sold as one piece, so it is the shell itself rather than a full body set with separate accessories.

That distinction matters because a body shell swap is mostly about transferring or fitting the body onto the existing mounts, not rebuilding the truck. If you were expecting a painted body with pre-installed accessories or a complete body assembly, check the listing carefully before ordering. The supplied information describes a single green SUV body shell and does not list additional included hardware.

What the 13827-V1-G listing confirms

  • 13827-V1-G: Genuine Redcat Racing replacement body shell for EVEREST GEN7 PRO and EVEREST GEN7 SPORT vehicles. Fitment is limited to those two models in the supplied information, so this is the first compatibility check before installation.
    13827-V1-G
    13827-V1-G
  • 13827-V1-G: Green SUV-style body, 1 piece included; part number 13827-V1-G for easy identification. You are replacing or customizing the shell as a single unit, so plan around one body rather than a multi-part kit.

Installing the 13827-V1-G body shell

The supplied catalog does not include a manufacturer installation procedure, torque values, or a list of required fasteners. The steps below describe the general order of a body shell swap, but you should follow your EVEREST GEN7 PRO or GEN7 SPORT owner's documentation for the specific mounting method and hardware.

  1. Confirm the old body and the new part: Check that the vehicle is an EVEREST GEN7 PRO or GEN7 SPORT and that the new shell is the 13827-V1-G green SUV body. If either does not match, stop before removing anything.
  2. Remove the existing body: Detach the current shell from the chassis using the body mounting points on your vehicle. Keep the mounting hardware together so it can be reused or checked against the new shell.
  3. Compare mounting points: Set the old shell and the 13827-V1-G side by side and compare the body post locations and cutouts. The catalog confirms model fitment but does not list body post spacing or hole positions, so this visual check is your practical confirmation.
  4. Fit the new shell: Seat the 13827-V1-G on the mounts and check that it sits evenly without forcing any point. If something binds, recheck alignment rather than trimming or drilling based on guesswork.
  5. Recheck before you run the vehicle: With the body in place, confirm it is secure and does not interfere with moving parts. The supplied information does not include running clearances or safety checks, so rely on your model's documentation for those.

Fitment and ordering checks before you buy

Because the 13827-V1-G is a fitment-specific part, a few quick checks prevent the most common ordering mistakes.

  • Model name, not just brand: The listing names EVEREST GEN7 PRO and EVEREST GEN7 SPORT. A different Redcat model is not confirmed as compatible by the supplied information.
  • Part number on the item: Match 13827-V1-G on the packaging or listing to avoid mixing it up with other Redcat body shells.
  • What is in the box: The catalog states one green SUV-style body. It does not confirm included body clips, decals, or mounting hardware, so check your existing parts before assuming they are supplied.
  • Your goal: replacement or customization: The listing describes the shell as intended for replacement or customization. If you are changing the look of a compatible EVEREST GEN7, this is the direct part; if you need a different body style, this is not the one.

What the catalog does not confirm

The supplied record does not include installation instructions, recommended tools, fastener sizes, body post dimensions, or care procedures for the 13827-V1-G. It also does not confirm whether the shell arrives pre-trimmed or pre-drilled. Treat those as unknowns to verify against the product packaging or your vehicle's documentation rather than assumptions.

This matters for planning: if your EVEREST GEN7 PRO or GEN7 SPORT uses a specific body mounting setup, confirm it matches the shell before you commit. The catalog gives you the model fitment and the part number, which are the two facts that decide whether this body belongs on your truck.

Related Articles

Customer Service
Home
Products
Cart
Profile