Back to Blog
How-to Guides 2026-11-15 Redcat Racing 0 views

How to Install Redcat RER29971: Step-by-Step Guide

How to Install Redcat RER29971: Step-by-Step Guide

Learn how to install the Redcat RER29971 clear crawler body on your ASCENT 18. This guide covers fitment checks, hardware considerations, and the installation process.

Start with the right body for your ASCENT 18

The Redcat RER29971 is a clear crawler body designed specifically for the ASCENT 18. Before you begin any installation work, confirm that your vehicle is indeed an ASCENT 18 and that you have the correct part number. This body is supplied as a single clear piece, so you will need to prepare it for mounting according to your own preferences or club rules.

Because the catalog does not include preparation or operating instructions, this guide focuses on the physical fitment and the steps you can take with the information available. Always test-fit before making any permanent modifications.

What the RER29971 listing confirms

  • RER29971: Redcat Racing RER29971 is a clear crawler body intended for the ASCENT 18. This confirms the body is designed for your vehicle, so you can proceed with confidence if you own an ASCENT 18.
    RER29971
    RER29971
  • RER29971: It is listed as a spare part in the Bodies & Parts category and is supplied as a single clear body piece. Knowing you receive one clear body helps you plan for any painting, decaling, or mounting hardware you may need separately.
  • RER29971: Compatible vehicle: ASCENT 18 This is the key fitment detail; it ensures the body is intended for the ASCENT 18 chassis.

Installation steps for the RER29971 body

The following steps are a general guide based on the product type and common practices for clear RC bodies. Since the manufacturer's instructions are not included in the supplied information, use these as a starting point and adapt as needed.

  1. Prepare your workspace: Clear a flat, well-lit area. Gather any tools you typically use for RC body work, such as body reamer, scissors, and sandpaper. Have your ASCENT 18 ready and remove the old body if present.
  2. Test-fit the clear body: Before painting or cutting, place the RER29971 body onto the ASCENT 18 chassis. Check that the wheel arches align with the tires and that the body posts line up with the mounting holes. Do not cut yet; just observe the fit.
  3. Mark and cut mounting holes: Using the body post locations as a guide, mark where the holes need to be. Double-check alignment, then carefully cut or ream the holes. It is better to start small and enlarge gradually.
  4. Trim excess material if needed: If the body has excess lexan around the edges or wheel wells, trim it carefully with curved scissors. Leave a small margin and sand the edges for a clean finish.
  5. Paint and detail (optional): If you plan to paint the body, do so now before final mounting. Follow paint manufacturer instructions. Allow adequate drying time.
  6. Mount the body: Secure the body to the chassis using your existing body clips or mounts. Ensure it sits evenly and does not interfere with moving parts.

Hardware and fitment checks before you order

The RER29971 listing does not specify included hardware or detailed fitment dimensions. Use these checks to ensure a smooth installation.

  • Body posts and clips: Confirm that your ASCENT 18 has its original body posts and clips. The RER29971 body is designed for the ASCENT 18, so existing hardware should work, but verify that posts are not damaged.
  • Wheelbase and track width: The catalog does not provide specific dimensions. Visually compare the new body to your old one or test-fit to ensure wheel openings align with the tires.
  • Paint and decals: The body is clear, so you will need polycarbonate paint and any decals you want. These are not included.

What the catalog does not tell you

The supplied information does not include step-by-step installation instructions, recommended tools, or hardware specifications. It also does not confirm whether the body is pre-trimmed or requires cutting. For these details, refer to the manufacturer's documentation or contact Redcat Racing support. This guide is based solely on the catalog facts provided and common practices for RC body installation.

Related Articles

Customer Service
Home
Products
Cart
Profile