Common Redcat RER15464 Steering Link Problems and Fixes
By Redcat Racing | Published: 2026-10-29
Category: How-to Guides
Identify and fix steering link issues on your Redcat RER15464 body set. This guide covers symptoms, causes, and corrective actions for common steering problems.
Quick answer
Steering link problems with the Redcat RER15464 body set often stem from binding, loose hardware, or worn components. This guide helps you diagnose and fix the most common issues.
Why steering link problems happen with the RER15464
The RER15464 is a clear replacement body set for the GEN 9, not a steering component itself. However, when installed, the body can interfere with steering links if not trimmed or mounted correctly.
Common issues include the body rubbing against the steering tie rod or drag link, causing binding or reduced steering throw. Loose screws on the steering assembly can also mimic link problems.
Diagnosis and fix steps
- Symptom: Steering feels stiff or binds at full lock. Wheels do not return to center smoothly.
- Likely cause: Body interference: the RER15464 body may rub against the steering link at extreme angles. Also check for debris or a bent link. Inspect the body for contact marks on the inside of the shell.
- Corrective action: Trim the body where it contacts the steering link using a hobby knife or Dremel. Recheck clearance after each small cut. Also tighten all steering link screws to spec. If trimming does not resolve binding, inspect the steering link for damage.
- When to stop or choose another option: If the link is bent or has stripped threads, replace it with a new Redcat steering link part. Do not attempt to straighten a bent link as it may fail under load. Order a replacement steering link if the part is damaged.
Product facts
- RER15464: The Redcat Racing International Scout 800 Body Set is a clear replacement body set for the GEN 9 vehicle. If you're using this body, check for clearance issues with the steering links before troubleshooting other components.
RER15464
