How to Replace Redcat Part RER44277 on Your RC Vehicle
By Redcat Racing | Published: 2026-10-27
Category: How-to Guides
Learn how to replace the Redcat RER44277 green body on your Ascent 32 V2. Follow these steps to remove the old body, align the new part, and secure it properly.
Quick Answer
To replace Redcat part RER44277 on your Ascent 32 V2, remove the old body clips and shell, align the new green body over the chassis, and secure it with the original hardware.
Why Use the Genuine RER44277 Body
The RER44277 is a direct replacement part designed specifically for the Ascent 32 V2. Using a non-OEM body may require drilling new mounting holes or trimming the wheel arches, which can compromise fit and durability. The factory green color and one-piece construction mean you get a seamless match without additional painting.
Step-by-Step Replacement Guide
- Remove the Old Body: Take off the body clips or pins that secure the existing shell to the chassis. Gently lift the body off, noting where the clips go. If the body is stuck, check for hidden screws or tight-fitting posts. Common mistake: Forcing the body off can break mounting posts. Work slowly and check all attachment points.
- Prepare the New RER44277 Body: Unpack the green RER44277 body and remove any protective film. Inspect it for cracks or defects. Align the body over the chassis, ensuring the wheel wells match the tires and the body posts line up with the mounting holes. Common mistake: Not checking alignment before securing can cause rubbing or poor fit. Adjust the body position before inserting clips.
- Secure the Body: Push the body posts through the holes in the new shell. Reinstall the body clips or pins, pressing them firmly until they snap into place. Verify that the body sits evenly and does not shift during movement. Common mistake: Using mismatched or worn clips can let the body come loose during runs. Use the original hardware or a fresh set.
Product Facts
- RER44277: This Redcat Racing body is a replacement part for the Ascent 32 V2, supplied as one piece in green. It ensures a bolt-on fit without modification, saving you time and preserving the vehicle's original look.
RER44277
