Redcat RER43546 Buying Guide: Fitment and What to Check
By Redcat Racing | Published: 2026-11-03
Category: Koopgidsen
Need a carbon fiber servo plate for your VERTEX 10? Learn RER43546 fitment, what to inspect before ordering, and when this Redcat spare part is the right call.
Quick answer
Buy RER43546 only if you own a Redcat VERTEX 10 or VERTEX 10 WIDE and need a direct replacement carbon fiber servo plate. Check your current plate and servo mounting before ordering, because this part is listed for those two models only.
Why the carbon fiber material matters for a servo plate
The catalog lists RER43546 as a carbon fiber servo plate. Compared with a molded plastic plate, carbon fiber is typically stiffer, which can help keep the servo from flexing under load. That stiffness is useful if you run on high-grip surfaces or with a stronger servo, but it also means the plate will not absorb impacts the way a plastic part might. If your driving style involves frequent hard landings or curb hits, inspect the plate regularly for cracks or delamination.
What the listing does not tell you
The supplied catalog facts confirm compatibility with VERTEX 10 and VERTEX 10 WIDE, part number RER43546, carbon fiber material, and one piece per pack. They do not include servo size, mounting hole spacing, thickness, or included hardware. Those details matter for fitment, so measure your existing plate and compare before you buy. If you cannot confirm the dimensions, treat this as a decision limitation rather than assuming it will fit a different chassis.
Decision rules for buying RER43546
- Match your model first: Order RER43546 only if your vehicle is a Redcat VERTEX 10 or VERTEX 10 WIDE. If you run any other Redcat model, stop and look for a part listed for that chassis instead.
- Inspect the old plate before replacing: Remove your current servo plate and check for cracks, stripped mounting holes, or flex around the servo mounts. Replace it if you see damage; if the plate is intact, diagnose the servo or linkage before buying a new plate. A damaged plate is the main reason to buy this part; a working plate points to a different fault.
- Confirm one piece is enough: The catalog lists one piece per pack. If your build uses more than one servo plate or you want a spare, order the quantity you actually need rather than assuming a multi-pack.
- Check hardware and servo fit: The listing does not state included screws or servo compatibility. Reuse your existing hardware only if it is in good condition, and test-fit your servo to the plate before fully tightening. If you cannot confirm servo fit from the listing, measure your old plate and compare before ordering.
Product facts
- RER43546: RER43546 is a carbon fiber servo plate listed for use with the VERTEX 10 and VERTEX 10 WIDE. It is a direct replacement option only for those two models, so confirm your chassis before ordering.
RER43546
Who this part is for
Best for
- Owners of a Redcat VERTEX 10 or VERTEX 10 WIDE who need a direct replacement servo plate
- Drivers who want a stiffer carbon fiber plate for a servo that flexes under load
Not for
- Any Redcat model other than VERTEX 10 or VERTEX 10 WIDE
- Buyers who cannot confirm servo size or mounting hole spacing and need a guaranteed fit without measuring
