Back to Blog
Buying Guides 2026-11-17 Redcat Racing 0 views

Redcat 180001 Suspension Link Mount: Fitment Checks

Redcat 180001 Suspension Link Mount: Fitment Checks

A practical buying guide to the Redcat 180001 aluminum center suspension link mount set: what the catalog confirms, how to check fitment on your EVEREST-10, and what to verify before ordering.

What the 180001 actually is

The Redcat 180001 is a center suspension link mount set made from aluminum. The catalog lists it as both a hop-up and a spare part for the EVEREST-10, and the set contains two pieces. That is the whole decision surface: one part type, one listed vehicle, one material, two pieces per package.

If you are shopping for a suspension link mount for an EVEREST-10, this is the part number to start with. If you are shopping for any other vehicle, the supplied listing gives you no reason to assume it fits.

Catalog facts that drive the buying decision

  • 180001: Part type: Center Suspension Link Mount, product code 180001 Match the part type and code to the position you are repairing before you compare anything else.
    180001
    180001
  • 180001: Compatible with: EVEREST-10 This is the only vehicle compatibility the catalog confirms, so it is the boundary of a safe fitment claim.
  • 180001: Material: Aluminum The listing identifies an aluminum mount, which is the material fact you can rely on when comparing it with what is currently on your vehicle.
  • 180001: Package quantity: 2 pieces One order gives you two pieces, so plan the job around a pair rather than a single mount.

How to check 180001 fitment before you order

Fitment here is a part-number and vehicle check, not a measurement exercise. Work through these in order and stop as soon as something does not match.

  1. Confirm the vehicle is an EVEREST-10: The catalog lists the 180001 for the EVEREST-10 only. Check your model designation before treating this as a candidate part.
  2. Confirm the position you are repairing is the center suspension link mount: The listing names a center suspension link mount, not a front or rear link or a general suspension bracket. Compare it with the part you are removing.
  3. Compare the part code on the old component or your documentation: Look for 180001 in your vehicle paperwork or on the part you are replacing. A code match is stronger evidence than a visual resemblance.
  4. Count how many pieces the job needs: The set ships as two pieces. If your repair involves both mounts, one set covers the pair as packaged; if you need more than two, order accordingly.

Where the catalog stops and you have to check

The supplied information does not include hardware, torque values, installation steps, or a list of other vehicles that accept the 180001. Treat those as open questions rather than settled details.

  • Fasteners and hardware: The listing does not confirm whether screws, pins or other hardware are included. Do not assume the set is a complete installation kit.
  • Installation procedure: No fitting or tightening instructions are supplied. Follow the procedure for your EVEREST-10 rather than improvising from the part description.
  • Other vehicles: Only the EVEREST-10 is confirmed. Absence of other models in the listing is not proof of incompatibility, but it is not evidence of fitment either.
  • Dimensions: No measurements are supplied, so you cannot size-match the 180001 against a caliper reading from your old mount using this listing alone.

Spare or hop-up: one part, two reasons to buy

The 180001 is listed as both a hop-up and a spare part. As a spare, it makes sense when the center suspension link mount on your EVEREST-10 is the component you have identified as damaged or worn. As a hop-up, it is the aluminum version of that mount, and the listing gives you the material but no performance figures, weight, or strength claims to compare against.

That distinction matters for how you judge value. If you are replacing a broken mount, the deciding question is whether 180001 is the right position and vehicle. If you are upgrading, the only confirmed difference in the supplied record is the aluminum material, so buy it for that reason rather than for a promised handling gain the catalog does not document.

A sensible way to place the order

Because the set contains two pieces, check your EVEREST-10 for any other play or damage around the center suspension link area before you finalize the order. If both mounts are due for replacement, a single 180001 set covers the pair as packaged. If only one side is affected, you will still receive two pieces, which leaves you a spare for the next repair.

Keep the part code 180001 with your vehicle records. When you next need a suspension component, the code tells you exactly which mount you already standardized on, which makes repeat ordering and troubleshooting simpler.

Related Articles

Customer Service
Home
Products
Cart
Profile