Back to Blog
Buying Guides 2026-11-15 Redcat Racing 0 views

BS810-032 Bearing Set: Fitment and Buying Checks

BS810-032 Bearing Set: Fitment and Buying Checks

A practical look at the Redcat BS810-032 two-piece ball bearing set: which vehicles it is listed for, how to confirm your part number, and what the catalog does not confirm.

Start with the vehicle and the part number

The BS810-032 is a small hardware spare from Redcat Racing: a set of two ball bearings. Before you order, the useful question is not whether the bearing looks right, but whether your vehicle and your current part number match what the catalog lists. The listing identifies this part for the MACHETE current vehicle and the TERREMOTO V2 legacy vehicle.

That matters because the same bearing size can appear in more than one place on a chassis, and the catalog does not map BS810-032 to a specific location. Use the vehicle name and the part number together as your first filter, then confirm the size against the bearing you are replacing.

What the BS810-032 listing confirms

  • BS810-032: BS810-032 is a set of two 8x16x5mm ball bearings, listed as a hardware spare part. The set quantity and size are the two facts you can check directly against your old bearing before ordering.
    BS810-032
    BS810-032
  • BS810-032: The part is identified for use with the MACHETE current vehicle and the TERREMOTO V2 legacy vehicle. If your vehicle is not one of these two, the catalog does not confirm fitment for you.
  • BS810-032: Part number: BS810-032; parts category: Hardware, Spare Parts. Matching the part number prevents confusing this bearing set with other Redcat hardware spares.

Checks to make before you buy

These checks use only what the catalog supplies, so they keep you from guessing about a part that is inexpensive but annoying to order twice.

  • Confirm the vehicle name: The listing names the MACHETE and the TERREMOTO V2. If you are working on a different Redcat vehicle, treat fitment as unconfirmed by this listing rather than assuming it carries over.
  • Match the bearing size: The listed size is 8x16x5mm. Compare that with the marking or measurement of the bearing you are removing, using the same units.
  • Check the quantity you need: One set contains two bearings. If your repair involves more than two positions, count how many sets you need before checkout.
  • Keep the part number handy: BS810-032 is the identifier to search and to record in your spares list, especially if you own both a current and a legacy vehicle.

What the catalog does not confirm

The supplied information does not state which position on the MACHETE or TERREMOTO V2 uses this bearing, and it does not include installation steps, torque values, or bearing-seating instructions. It also does not confirm compatibility with any vehicle beyond the two named.

That is a limit of the listing, not a statement that the bearing cannot be used elsewhere. If you need a location-specific answer, check your vehicle's parts diagram or the bearing you are replacing rather than relying on this page alone.

How this fits a spare-parts order

Because the BS810-032 is a hardware spare, it is the kind of item worth adding when you are already ordering parts for a MACHETE or TERREMOTO V2. The catalog price is USD 5.11, with a comparison price of USD 7.99, so the cost per set is low, but the real value is having the correct size on hand when a bearing needs replacement.

Order the number of sets your repair calls for, and keep the part number recorded. If your vehicle is not listed, spend your money on a part the catalog actually identifies for your chassis.

Related Articles

Customer Service
Home
Products
Cart
Profile