Redcat RER11349 Buying Guide: Fitment and What to Check
By Redcat Racing | Published: 2026-11-03
Category: أدلة الشراء
Buying the Redcat RER11349 rear portal axle shafts? Check vehicle fitment, quantity, and wear signs before you order this pair of spare parts.
Quick answer
Buy the Redcat RER11349 if you own an ASCENT FUSION, EVEREST ASCENT, GEN 9, GEN8 SCOUT II, or legacy Gen8 V2 and need a pair of rear portal axle shafts. Confirm your vehicle is listed before ordering, since this part is specific to the rear portal axle assembly.
Why the rear portal assembly matters for fitment
The RER11349 is not a universal axle shaft. It is made for the rear portal axle assembly, so the front and rear ends of your vehicle may use different parts. If you are unsure which end needs service, inspect both before you buy. The catalog listing does not include dimensions or spline counts, so the vehicle list is your primary fitment check.
What the pair quantity means for your repair
This listing includes one pair, or two shafts. That is useful when both rear shafts are worn or damaged, but it may leave you with a spare if only one side failed. There is no single-shaft option shown in the catalog, so plan around the pair rather than assuming you can buy just one.
When to replace instead of upgrade
If your rear portal axle shafts are bent, twisted, or badly worn at the drive points, replacement is the practical path. The RER11349 restores the original rear portal setup rather than changing it. If you are looking for a different axle design or ratio, this is not the part for that goal, and the catalog does not present it as an upgrade.
Decision rules for buying RER11349
- Check your vehicle against the listed models: Order only if your vehicle is an ASCENT FUSION, EVEREST ASCENT, GEN 9, GEN8 SCOUT II, or legacy Gen8 V2. If your model is not on that list, do not assume it fits. The model list is the main fitment filter; there are no dimensions in the catalog to cross-check.
- Confirm the problem is at the rear portal axle: Inspect the rear portal assembly for bent, twisted, or worn shafts before buying. If the damage is at the front or elsewhere in the drivetrain, this pair will not solve it.
- Decide whether a pair suits your repair: Buy the pair if both rear shafts are worn or you want a spare. If only one shaft is damaged, you will still receive two, and the catalog does not show a single-shaft listing.
- Treat this as a stock replacement, not an upgrade: Choose RER11349 to restore the original rear portal setup. If you want a different axle design or ratio, this part is not presented for that purpose.
Product facts
- RER11349: Rear Portal Axle Shafts (1pr) intended for the rear portal axle assembly. You are buying a pair for the rear only, so confirm the failure is at the rear before ordering.
RER11349 - RER11349: Listed for ASCENT FUSION, EVEREST ASCENT, GEN 9, GEN8 SCOUT II, and legacy Gen8 V2. Use this list as your fitment check, and verify your exact model before purchase.
Who should buy RER11349
Best for
- Owners of ASCENT FUSION, EVEREST ASCENT, GEN 9, GEN8 SCOUT II, or legacy Gen8 V2 with rear portal axle damage
- Drivers who want a pair of stock rear shafts for a direct replacement
Not for
- Vehicles not listed in the catalog fitment
- Front axle or non-portal drivetrain repairs
- Builders looking for an axle upgrade rather than a stock replacement
