One is a fastener set, the other is a chassis
The RER19111 and RER18099 do not compete for the same spot on your RC. RER19111 is a hardware spare part set: six 4x40mm countersunk hex machine thread screws. RER18099 is a single-piece 7075 aluminum chassis for the Machete, intended for 6S power setups. Because their jobs are different, the useful comparison is not which one is better—it is which one your vehicle and your repair actually call for.
That distinction matters when you are ordering parts. A screw set solves a fastener problem; a chassis solves a structural one. Mixing them up wastes time and money, so check the vehicle and the damage before you buy.
What the RER19111 listing confirms
- RER19111: RER19111 is a hardware spare part set of 4x40mm countersunk hex machine thread screws, supplied as 6 pieces. The size and quantity tell you whether this set matches the screws you are replacing; six pieces covers a small batch of identical fasteners.

RER19111 - RER19111: The listing names the MACHETE, VALKYRIE MT, and VALKYRIE TR as current vehicles for this set. Those three vehicles are the supported fitment starting point; if yours is not on the list, the catalog does not confirm it.
- RER19111: Air shipping is not eligible for this product. If you need the screws quickly, check the available shipping method before you rely on an air option.
What the RER18099 listing confirms
- RER18099: RER18099 is a high-strength 7075 aluminum chassis designed for 6-cell (6S) power setups, finished in black. The material and 6S design point are the core reasons to choose this chassis over a stock replacement.

RER18099 - RER18099: It is supplied as a single, ready-to-install chassis component and is listed as compatible with the Redcat Racing Machete as a spare part. The Machete is the confirmed vehicle; the single-piece supply means you are buying the chassis itself, not a hardware kit.
Fitment and purpose side by side
Use this table to match the part to the problem, not to rank one above the other.
- Part type: RER19111: countersunk hex machine thread screws (hardware). RER18099: 7075 aluminum chassis (structural).
- Listed vehicles: RER19111: MACHETE, VALKYRIE MT, VALKYRIE TR. RER18099: Machete only.
- Quantity supplied: RER19111: 6 screws. RER18099: 1 chassis.
- Power design note: RER18099 is designed for 6S setups; the RER19111 listing carries no power-design claim.
- Shipping note: RER19111 is not eligible for air shipping; no shipping restriction is stated for RER18099 in the supplied record.
How to decide which one to order
- Identify the failed or missing item: If you are replacing bent or missing 4x40mm countersunk hex screws, RER19111 is the matching set. If the chassis plate itself is damaged, RER18099 is the relevant part.
- Confirm your vehicle against the listing: RER19111 is listed for the MACHETE, VALKYRIE MT, and VALKYRIE TR. RER18099 is listed for the Machete. If your vehicle is not named, the supplied catalog does not confirm fitment.
- Check the quantity you need: RER19111 gives you six screws; count how many you are replacing before ordering. RER18099 is one chassis, so one order covers one vehicle.
- Consider the power setup: RER18099 is designed for 6S configurations. If you are building or repairing a Machete around a 6S setup, that design point is relevant; the screw set has no such dependency.
Where the catalog stops and you have to check
Neither listing supplies installation steps, torque values, or a full exploded-parts diagram. The RER18099 record says it is ready to install but does not describe the procedure; the RER19111 record gives size and quantity but not the locations each screw serves. Treat those as gaps to fill from your vehicle's documentation or by matching the parts you remove, not as instructions to improvise.
The RER19111 listing also does not state whether the six screws are all identical in length or whether they are intended as a complete replacement for a specific assembly. If your repair depends on that detail, verify it before ordering. Similarly, RER18099 is listed for the Machete, but the record does not confirm fitment for other models, even ones that share the RER19111 screw set.



