Redcat RER15452 vs RER15465: Which Part Fits Your Build?
By Redcat Racing | Published: 2026-10-31
Category: Comparisons
RER15452 is a 10-pack of 4 × 11.5 mm hex screw pins; RER15465 is a blue International Scout 800 body set for the GEN 9 Scout. Compare fitment and decide which your build needs.
Quick answer
These parts solve different problems: RER15452 is a 10-pack of 4 × 11.5 mm hex screw pins for fastening on Ascent Fusion, Coe Custom Hauler, Everest Ascent, and Gen 9 vehicles, while RER15465 is a blue International Scout 800 replacement body set for the GEN 9 Scout. Choose RER15452 if you need hardware; choose RER15465 if your Scout 800 body needs replacing.
Why these two parts are not interchangeable
The model numbers sit close together, but the catalog lists them in different roles. RER15452 is a fastener pack: ten 4 × 11.5 mm hex screw pins. RER15465 is a body set: one blue International Scout 800 body molded to the Scout 800 dimensions for the GEN 9 Scout. One keeps parts attached; the other restores the shell.
That means fitment questions differ. For RER15452, the question is whether your vehicle uses 4 mm diameter, 11.5 mm long hex screw pins. For RER15465, the question is whether you own a GEN 9 Scout that accepts the Scout 800 body set.
Where the compatibility lists overlap and where they don't
RER15452 lists compatibility with Ascent Fusion, Coe Custom Hauler, Everest Ascent, and Gen 9 vehicles. RER15465 is tied specifically to the GEN 9 Scout. Gen 9 is the only overlap in the supplied facts, so a Gen 9 owner could plausibly need either part, but for different jobs.
If you are unsure which fastener size your build uses, check the exploded view or parts list for your model before ordering. The catalog does not list every vehicle that uses 4 × 11.5 mm pins, so the compatibility list is a starting point rather than an exhaustive fitment chart.
Cost and quantity trade-off
RER15452 is a low-cost consumable pack: ten pins for USD 5.11 against a catalog comparison price of USD 7.99. Buying a pack makes sense if you strip or lose fasteners during maintenance. RER15465 is a larger purchase at USD 55.67 against a comparison price of USD 86.99, and it replaces a complete body rather than a single fastener.
The trade-off is frequency versus impact. Pins wear out or disappear in small numbers, so a 10-pack covers repeat repairs. A body set is a one-time replacement unless you damage the shell again, so it is worth confirming the blue Scout 800 styling is what you want before spending more.
Trade-offs to weigh before ordering
- Fastener vs body shell: RER15452 fixes how parts are held together; RER15465 replaces the exterior body. Neither substitutes for the other, so match the part to the failure you are actually repairing.
- Broad vs narrow fitment: RER15452 lists four vehicle families, while RER15465 is specific to the GEN 9 Scout. If you own a Gen 9, verify which part your repair calls for rather than assuming the model numbers are related.
- Spares pack vs single replacement: The 10-pin pack covers repeated small losses; the body set is a single blue Scout 800 shell. Budget for the pack as a consumable and the body as a one-off replacement.
Product facts
- RER15452: Set of ten 4 × 11.5 mm hex screw pins with a hex head for easy tool access. A 10-piece pack keeps spare fasteners on hand for routine maintenance and quick repairs.
RER15452 - RER15465: Blue International Scout 800 body set molded to the Scout 800 dimensions for the GEN 9 Scout. It is a direct replacement body for that vehicle, so no trimming or modification is implied by the catalog.
RER15465
Which part fits your build?
Best for
- Owners of Ascent Fusion, Coe Custom Hauler, Everest Ascent, or Gen 9 vehicles who need 4 × 11.5 mm hex screw pins
- Drivers who want a 10-piece spare fastener pack for routine repairs
- GEN 9 Scout owners replacing a damaged or worn blue International Scout 800 body
Not for
- Anyone looking for a body shell when they actually need fasteners, or the reverse
- Vehicles outside the listed compatibility for either part
- Builds that use a different screw pin diameter or length than 4 × 11.5 mm
