Redcat 510148 Steering Ackermann Plate: Fitment and Install FAQ
By Redcat Racing | Published: 2026-10-31
Category: Product Reviews
Redcat 510148 is a one-piece aluminum steering Ackermann plate for legacy RC-MT10E and TR-MT10E vehicles. Here is what it does, which chassis it fits, and how to install it.
Quick answer
Redcat 510148 is a replacement steering Ackermann plate made of aluminum and supplied as one piece. It is listed for legacy RC-MT10E and TR-MT10E vehicles, so check your chassis before ordering.
Why the Ackermann plate matters more than it looks
The Ackermann plate sets the angle of the steering linkage relative to the wheels. When it is bent or worn, the truck can steer unevenly or feel vague on turn-in. Replacing it restores the steering geometry the chassis was designed around.
Because 510148 is aluminum, it is a rigid part rather than a flex-prone plastic piece. That rigidity is useful for consistent steering feel, but it also means the plate transfers impact rather than absorbing it, so check the surrounding steering parts after a hard hit.
The fitment catch: legacy vehicles only
The listing names RC-MT10E and TR-MT10E as legacy vehicles. If you are running a current-generation Redcat chassis, do not assume 510148 will bolt on. Compare your existing plate's shape and mounting holes to the product image before buying.
The listing does not publish dimensions, hole spacing, or a full compatibility list. That absence is a real limitation: when in doubt, confirm your model and plate shape with Redcat support rather than ordering on part number alone.
Redcat 510148 FAQ
- What is Redcat 510148 used for?
- It replaces the steering Ackermann plate on select legacy vehicles. The plate positions the steering linkage so the front wheels follow the intended steering geometry.
- Which vehicles does 510148 fit?
- The listing identifies legacy RC-MT10E and TR-MT10E vehicles. It does not list other chassis, so verify your model before ordering. If your chassis is not one of those two, measure your existing plate first.
- How do I install Redcat 510148?
- Remove the old plate, clean the mounting area, and transfer the steering linkage to the new plate. Tighten the mounting screws evenly and check for full steering travel before running the vehicle. The listing does not include a torque spec, so follow your vehicle manual or tighten to a snug fit without crushing the plate. Recheck screw tension after the first run.
- Does 510148 include screws or hardware?
- The listing notes one piece and does not mention hardware. Reuse your existing screws if they are in good condition, and replace any that are stripped or bent.
- Is aluminum better than the original plate?
- Aluminum is rigid and holds steering geometry well, but it does not flex like plastic. After a hard impact, inspect the plate and the steering parts around it for bends or cracks.
Product facts
- 510148: Redcat 510148 is an aluminum steering Ackermann plate supplied as one piece. You get a single rigid replacement plate, so no additional hardware is included in the listing.
510148
