Back to Blog
Tips & Care 2026-11-15 Redcat Racing 0 views

Redcat 07135 Gear Hub Problems: Wear Signs and Fixes

Redcat 07135 Gear Hub Problems: Wear Signs and Fixes

Diagnose Redcat 07135 gear hub problems on the RAMPAGE XT. Learn what the aluminum hub does, how to spot wear, and when replacement makes sense.

What the 07135 gear hub does on the RAMPAGE XT

The Redcat 07135 is an aluminum gear hub listed for the RAMPAGE XT. It is a single-piece spare part, identified by part number 07135. Before chasing a drivetrain noise or a slipping feel, confirm that the 07135 is the part in your build and that the vehicle is the RAMPAGE XT. The catalog also associates search terms such as gear mount XT XSC XB with this part, so check your manual or parts diagram rather than assuming the name covers every chassis.

Because the hub is listed as aluminum, it is a metal component in the gear drive path. That matters for diagnosis: aluminum can wear, deform, or loosen over time, but the supplied listing does not include a service interval, torque spec, or inspection procedure. Use the checks below to narrow down whether the hub is the likely culprit, and treat any repair step as your own judgment unless your vehicle documentation says otherwise.

Catalog facts that affect diagnosis

  • 07135: Gear Hub (Aluminum) (1pc), part number 07135, listed for the RAMPAGE XT. Confirms the part identity and vehicle fitment before you troubleshoot or order.
    07135
    07135
  • 07135: Material listed: Aluminum. Helps you interpret wear patterns on a metal hub rather than a plastic part.
  • 07135: Quantity: 1 piece. If your repair needs more than one hub, you will need more than one unit.

Symptoms that point toward the gear hub

  • Clicking or ticking from the drivetrain: A rhythmic noise that changes with wheel speed can come from several places. If the sound is near the gear hub area, inspect the hub and its surrounding parts for looseness or visible damage. The catalog does not list a specific noise as a confirmed 07135 symptom, so use this as a starting point, not a diagnosis.
  • Slipping or inconsistent drive: If power delivery feels uneven, check that the hub is seated and that related fasteners are secure. Do not assume the hub is worn until you have ruled out loose hardware or a damaged gear. The supplied information does not include a torque specification, so consult your RAMPAGE XT documentation for tightening values.
  • Visible wear or deformation on the hub: Look for rounded edges, cracks, or a hub that no longer fits snugly. Aluminum can show wear at contact points. If you see obvious damage, replacement is the practical path; the catalog does not offer a repair procedure for a damaged hub.
  • Looseness that returns after tightening: A hub that keeps coming loose may have worn surfaces or damaged threads. Inspect the hub and the parts it mates with. If the hub itself is damaged, replacing it is more reliable than repeated tightening.

How to inspect the 07135 without guessing

Start with the vehicle off and the battery disconnected. Remove the gear hub according to your RAMPAGE XT manual, then clean it so you can see the surfaces. Check the hub for cracks, rounded splines or teeth, and any area where material has been worn away. Also inspect the parts that contact the hub; a worn mating part can make a new hub feel loose or noisy.

The catalog does not supply a wear limit or a measurement spec for the 07135. That means you cannot confirm wear with a number from this listing alone. Instead, compare the hub to a new one if you have it, or look for clear physical damage. If the hub looks intact and fits securely, the problem may be elsewhere in the drivetrain.

A practical troubleshooting sequence

  1. Confirm the vehicle and part: Verify that your vehicle is a RAMPAGE XT and that the installed part is marked or documented as 07135. The catalog lists this hub for the RAMPAGE XT only.
  2. Check the simple causes first: Look for loose screws, a damaged gear, or a binding drivetrain before removing the hub. The catalog does not list these as confirmed causes, but they are common inspection points that cost nothing to check.
  3. Remove and inspect the hub: Follow your manual for removal. Clean the hub and check for cracks, wear, or deformation. Do not force a hub that is stuck; use the procedure in your vehicle documentation.
  4. Decide between reuse and replacement: If the hub is undamaged and fits properly, reuse it and look for the cause elsewhere. If it is cracked, worn, or loose, replace it with a new 07135. The catalog does not provide a repair method for a damaged aluminum hub.
  5. Reassemble and retest: Reinstall the hub and related parts according to your manual. The catalog does not include a torque spec or thread-locking instruction, so use the values in your RAMPAGE XT documentation. Test at low speed first.

Maintenance habits that help you catch wear early

The 07135 listing does not include a maintenance schedule, so you will need to set your own inspection interval based on how often you run the RAMPAGE XT. A sensible approach is to check the hub whenever you clean the vehicle or replace a gear nearby. Look for the same signs each time: cracks, rounded edges, looseness, and unusual noise. Keeping a note of when you last inspected the hub makes it easier to spot a trend.

Because the hub is aluminum, avoid overtightening fasteners during reassembly. The catalog does not state a torque value, so rely on your vehicle manual. If you do not have the manual, check with Redcat Racing support rather than guessing. A hub that is tightened unevenly or excessively can be damaged, and that damage may look like wear.

Replacement tips before you order

  • Order the correct quantity: The 07135 is sold as one piece. If your repair involves more than one hub, order the number you need. The catalog does not list a multi-pack.
  • Check the part number on your old hub: If the old hub is marked, compare it to 07135. If it is not marked, use the parts diagram for your RAMPAGE XT to confirm the location. The catalog associates this part with the RAMPAGE XT, and the search terms include XT XSC XB, so do not assume it fits every Redcat model.
  • Inspect related parts at the same time: A worn gear or a damaged bearing can cause symptoms that look like a hub problem. The catalog does not list related part numbers for this repair, so use your vehicle diagram to identify anything that contacts the hub.
  • Keep the old hub for comparison: Before you discard a worn hub, compare it to the new one. Differences in shape or fit can tell you whether the old part was actually worn or whether the problem was installation-related.

What the catalog does not confirm

The supplied information for the 07135 does not include installation instructions, a torque specification, a wear limit, or a list of related parts. It also does not confirm fitment for vehicles other than the RAMPAGE XT. If you need those details, check your RAMPAGE XT manual or contact Redcat Racing support. Do not treat the absence of a specification in this listing as proof that the part has no such requirement; it only means the catalog does not provide it here.

If your problem persists after replacing the hub, the cause may be outside the hub itself. The catalog does not provide a diagnostic flowchart for the RAMPAGE XT, so work through the drivetrain systematically and use the vehicle documentation as your primary reference.

Related Articles

Customer Service
Home
Products
Cart
Profile